The Ichimoku Kinko Hyo charting technique was developed by Japanese analyst Hosoda, who wrote under the name of "Ichimoku Sanjin".
The Ichimoku Kinko Hyo indicator consists of five lines:
Tenkan-sen - the average price level, (High+Low)/2, calculated over the first time period;
Kijun-sen - the average price level over the second time period;
Senkou Span A / Up Kumo - midway between Tenkan-sen and Kijun-sen, shifted forward for the length equal to the second time period;
Senkou Span B / Down Kumo - the average price level over the third time period, shifted forward for the length equal to the second time period.
Chinkou Span - current bar close, shifted backward for the length equal to the second time period.
Ichimoku Kinko Hyo
The "cloud" known as the "Kumo", is the space between "Senkou Span A" and "Senkou Span B".
If the price stays above the cloud then there is an upward trend.
If it stays below the cloud then there is a downward trend.
If the price is within the cloud then the market is flat.
If Tenkan-sen line moves sideways then it is a signal for a flat market.
In order to add Ichimoku Kinko Hyo indicator in MetaTrader 4, use "Insert ->Indicators->Oscillators->Ichimoku Kinko Hyo" menu sequence.
Ichimoku Kinko Hyo indicator signals:
When the price exits the cloud downward it is a sell signal, upward � buy signal:
Exit from the cloud
The price ranges before and after the cloud are often the same.
When the price and Chinkou Span (green line) intersect it is a signal to make a deal. If Chinkou Span crosses the price line from below it is a buy signal, if it crosses from above it is a sell signal:
Price and Chinkou Span cross
If Tenkan-sen (red line) crosses Kijun-sen (blue line) from above it is a sell signal, and vice versa:
Tenkan-sen and Kijun-sen cross
When the price is inside the cloud it tends to move in the direction of Tenkan-sen line (red line). If the Tenkan-sen line is directed downwards then the price tends to move to the lower edge of the cloud and vice versa:
Average True Range (ATR) is a market volatility index developed and described by W. Wilder in his book "New concepts of the technical trading systems".
True Range is the greatest among three following volumes:
the difference between the top and the bottom of the current bar;
the difference between the close of the previous bar and the top of the current bar;
the difference between the close of the previous bar and the low of the current bar.
Average True Range (ATR) is the moving average of the true range values. To add Average True Range index in MetaTrader 4 use the "Insert -> Indicators -> Oscillators -> Average True Range" menu sequence:
Average True Range (ATR)
Average True Range (ATR) oscillator analysis basics:
The greater the oscillator value, the greater the possibility for trend reversal.
The values of the Williams Percent Range (%R) oscillator lie between 0 and 100.
If the oscillator is between 80% to 100%, it denotes an oversold condition, whereas values in the range from 0% to 20% signify an overbought condition.
The formula to calculate Williams Percent Range oscillator is similar to the one used to calculate the Stochastic Oscillator:
%R = (MAX (HIGH (i - n)) - CLOSE (i)) / (MAX (HIGH (i - n)) - MIN (LOW (i - n))) * 100
Where:
CLOSE (i) - the current close price;
MAX (HIGH (i - n)) - the highest top over the previous n periods;
MIN (LOW (i - n)) - the lowest bottom over the previous n periods.
Williams Percent Range (%R) oscillator signals:
bullish divergence / bearish convergence the main signals that point to the weakness of the current trend;
in a flat market an exit from the overbought / oversold area is a signal to sell / buy.
To add Williams Percent Range index in MetaTrader 4 use the "Insert -> Indicators -> Oscillators -> Williams Percent Range, %R" menu sequence.
Williams Percent Range index:
Williams Percent Range index
Market Psychology
Each price is a consensus of value among traders. The recent high range shows the bulls or buyers maximum power. The low of the recent range reflects the maximum power of the bears during that trading range. The most important consensus is as always the closing price.
Williams %R compares each closing price to the recent range indicating whether bulls can close the price near the top of the range, or bears can close the market at the bottom of the price.
Price may be pushed higher or lower during the day but the Williams %R will indicate which group is actually capable of closing the market.
If bulls cannot close the market near the top of a rally they are weaker than they seem and this creates a shorting opportunity. If bears cannot close the market near the lows during a decline then they are weaker than they appear and this creates a buying opportunity.
Trading Rules
Divergences between price and Williams %R rarely occur, when they do these divergences identify the best trading opportunities using Williams %R.
Below is a 1hr price chart of the EUR/USD with Williams %R set at 14 showing bearish divergence:
The A-B line indicates the price advancing and the C-D line indicates the Williams %R nudging downwards showing bearish divergence. You would look for opportunities to short the market when bearish divergence occurs on the Williams %R.
Below is a 1hr price chart of the EUR/USD with Williams %R set at 14 showing bullish divergence:
The A-B line indicates price declining and the C-D line indicates the Williams %R nudging upwards showing bullish divergence. You would look for opportunities to go long the market when bullish divergence occurs on the Williams %R.
There are also less significant ways to trade Williams %R but this method is oneof the most poular. The second way to use Williams %R is to identify overbought and oversold conditions.
More on the Williams %R
It is important to remember that overbought does not necessarily imply time to sell, and oversold does not necessarily imply time to buy. A security can be in a downtrend, become oversold and remain oversold as the price continues to trend lower. Once a security becomes overbought or oversold, traders should wait for a signal that a price reversal has occurred.
As always, price reversal confirmation can also be accomplished by using other indicators or aspects of technical analysis with Williams %R.
One method of using Williams %R might be to identify the underlying trend and then look for trading opportunities in the direction of the trend. In an uptrend, traders may look to oversold readings to establish long positions. In a downtrend, traders may look to overbought readings to establish short positions.
How to Trade
The trading rules are simple. You sell when %R reaches 20% or lower (the market is overbought) and buy when it reaches 80% or higher (the market is oversold). However, as with all overbought/oversold indicators, it is wise to wait for the indicator price to change direction before initiating any trade.
Larry Williams defines the following trading rules for his %R: Buy when %R reaches 100%, and five trading days have passed since 100% was last reached, and after which the %R again falls below 85/95%. Sell when %R reaches 0%, and five trading days have passed since 0% was last reached, and after which the Williams %R again rises to about 15/5%.
Relative Vigor Index (RVI) calculation is based on the idea that in a rising market the closing price is usually higher than the opening price, and on the bearish market the closing is usually below the opening price.
To normalize the index the price fluctuation is divided by the maximum price range within the bar:
Relative Vigor Index (RVI) formula:
RVI = (CLOSE - OPEN) / (HIGH - LOW)
Where:
OPEN - open price;
HIGH - the highest price;
LOW - the lowest price;
CLOSE - close price.
To eliminate occasional price fluctuations (so called "noise") the Relative Vigor Index (RVI) oscillator is smoothed by the 10-period simple moving average. A signal line is also formed as a 4-period moving average on the oscillator values.
The basic signals of Relative Vigor Index (RVI) are:
Bullish divergence / bearish convergence - the main signal pointing to the weakness of the current trend;
A good moment to open a sell / buy position is the crossing of the RVI line by the signal line from above/below once the bullish divergence / bearish convergence has appeared on the chart;
In a flat market an exit from the overbought / oversold area is a signal to sell / buy.
To add Relative Vigor Index in MetaTrader 4 use the "Insert -> Indicators -> Oscillators -> Relative Vigor Index" menu sequence.
Force Index oscillator was developed by Alexander Elder. Its main function is to measure bullish force during each upward movement and bearish force during each downward movement.
The force of each market movement is defined by its trend, range and volume:
If the close of the current bar is higher than that of the previous bar, the force is positive.
If the current close is lower than the previous one, the force is negative.
The greater the range the greater the force.
The greater the volume the greater the force.
Force Index formula:
RAW FORCE INDEX = VOLUME (i) * (CLOSE (i) - CLOSE (i - 1))
FORCE INDEX = MA (RAW FORCE INDEX, N)
Where:
VOLUME (i) - the volume of the current bar;
CLOSE (i) - close price of the current bar;
CLOSE (i - 1) - close price of the previous bar;
MA - any moving average: simple, exponential or linear weighted;
N - smoothing period.
Smoothing by a short moving average (2 period) helps to find favourable moments to open and close positions. If smoothing is made by a long moving period (e.g. 13-period) the Force Index oscillator reveals if the trend changes or not.
The aim of the Stochastic Oscillator is to determine price behaviour and reversals by monitoring close prices within the recent highs and lows. The method is based on the observation that when prices are rising their close levels tend to be closer to the top. If the quotes tend to move downwards, the close is usually near the bottom.
Stochastic Oscillator consists of two %K and %D lines calculated as follows:
%K = (CLOSE - MIN (LOW (%K))) / (MAX (HIGH (%K)) - MIN (LOW (%K))) * 100
Where:
CLOSE � current close price;
MIN (LOW (%K)) � the lowest bottom within the number of %K periods;
MAX (HIGH (%K)) � the highest top within the number of %K periods.
%D = MA (%K, N)
Where:
N � smoothing period;
MA � moving average.
To add Stochastic indicator in MetaTrader 4 use the "Insert -> Indicators -> Oscillators -> Stochastic Oscillator� menu sequence. The window with the settings will appear:
Stochastic Oscillator Settings
%K period - number of bars used for Stochastic Oscillator calculation,
Slowdown - the degree of %K line inner smoothing. Value 1 gives a quick Stochastic Oscillator and value 3 � a slow one,
%D period - the moving average period along the %K line. It is used for %D calculation,
MA method - the %K line smoothing method (exponential, simple, smoothed, linear weighted) used for %D calculation.
Once the Stochastic Oscillator parameters have been set and the OK button has been pressed, the indicator appears under the price chart:
Stochastic Oscillator analysis
The %K line is usually displayed as a solid line and %D as a dashed line. At the level of 80% and 20% the overbought areas (higher than 80%) and oversold areas (lower than 20%) are indicated. Stochastic signals from these areas are considered to be more significant.
These are several basics of the Stochastic Oscillator analysis:
If the solid line (%K) crosses the dashed line (%D) from below this is a signal to buy; if the solid line (%K) crosses the dashed line (%D) from above this is a signal to sell;
Two sequential opposite intersections of %K and %D lines mean that the first signal was premature and that the previous, stronger price movement may resume;
If both lines move in the same direction then they move in the trend direction;
In a flat market, exit from the overbought (oversold) area is a signal to sell (to buy).
Under flat conditions exit from the overbought (oversold) territory is a signal to sell (buy);
Different types of the trend analysis can be used to analyze Relative Strength Index (RSI): trend lines, support / resistance levels, chart reversal and continuation patterns.
The figure below, for example, shows that the trend line on RSI being broken several bars before the analogical line on the price chart:
In order to add the Relative Strength Index (RSI) indicator in Metatrader 4, use the "Insert -> Indicators -> Oscillators -> Relative Strength Index" menu sequence.
Commodity Channel Index (CCI) measures the price deviation of a particular instrument from its average traded price.
A very high index value (more than +100) indicates that the price is in the overbought area, and a very low value (lower than -100) indicates that the price is in the oversold territory.
Commodity Channel Index (CCI) calculations:
1) Find a typical price: add high, low and close of each bar and divide it by 3: TP = (HIGH + LOW + CLOSE) / 3
2) Calculate the simple moving average of the typical prices over n-periods: SMA (TP, N) = SUM (TP, N) / N
3) Subtract SMA(TP, N) from the typical prices ( TP) of each preceding n periods: D = TP - SMA (TP, N)
4) Calculate simple moving average of the absolute D values over n periods: SMA (D, N) = SUM (D, N) / N
5) Multiply SMA (D, N) by 0,015: M = SMA (D, N) * 0,015
6) Divide M by D: CCI = M / D
Where:
HIGH - bar high;
LOW - bar low;
CLOSE - close price;
SMA - simple moving average;
SUM - total amount;
N - the number of periods used for the calculation.
Commodity Channel Index (CCI) signals:
Bullish divergence / bearish convergence is the main signal. In distinction from another oscillators, Commodity Channel Index (CCI) is the most sensitive one, hence divergence / convergence is not always a signal of the weakness of the trend, but always quite accurately defines the beginning of the correction;
Under flat conditions exit from the overbought / oversold territory is a sell (buy) signal.
In order to add the Commodity Channel Index (CCI) indicator in MetaTrader 4, use the "Insert ->Indicators -> Trend -> Commodity Channel Index" menu sequence.
Examples of CCI's bullish divergence / bearish convergence
Momentum indicator value is defined as the difference between price levels after a specified time period. If, for example, we take period 5, then the Momentum oscillator will be defined as the difference between the current close and the close 5 bars before. All negative and positive values are displayed on the chart with a zero line in the middle.
In MetaTrader 4, the Momentum indicator is defined not as the difference, but the correlation between the current price and the price n periods before:
MOMENTUM = CLOSE (i) / CLOSE (i - n) * 100
Where:
CLOSE (i) � current bar close;
CLOSE (i - n) � close n bars before.
Momentum signals:
if the indicator is below 100, then the market is bearish;
if above 100 then the market is bullish;
if the indicator is around 100, it signifies a flat market;
Determine when to open a position on a flat market.
To define if the trend is weak, use bullish divergence / bearish convergence.
Bullish divergence occurs when a new price high is not confirmed by a new oscillator high, i.e the next high is above the preceding one and the next oscillator high is lower than the preceding one. This implies that the uptrend is weak:
Bearish convergence occurs when a new bottom is not confirmed by a new oscillator bottom, i.e. every next bottom is lower than the preceding one and every next oscillator bottom is higher than the preceding one. This signals that the downtrend is weak:
Both bullish divergence and bearish convergence, however, show that it is better to refrain from opening a position against the weakening trend. Trend is valid until reversal signals appear.
It is important to be more careful with oscillators when the trend is strong; often false oscillator signals indicate the strength of the trend. If it is an uptrend then most of the time oscillators are in the overbought area, if it is a downtrend, they are in the oversold area. Overbought and oversold levels have to be defined for each indicator individually.
In the figures above Relative Strength Index (RSI) is used as an oscillator. If the indicator is above 70 then it is in the overbought area, if it is below 30 then it is in the oversold area.
When the trend is strong, the oscillator can be in the overbought (oversold) area for a long time and then it can exit the area but the trend will still be valid.
When the oscillator penetrates the overbought (oversold) area for the second time and then quickly goes back forming a bullish divergence/bearish convergence, there is a high chance that the trend will weaken.
In case, where the market is flat, it may be time to open a position once the oscillator leaves the overbought (oversold) area. Confirmation of the signal appears when the price is close to the upper (lower) border of the trading range.
Bullish divergence
Here the price is above and oscillator is below:
Medium signal
The price may rise if the oscillator is within the lower range.
The price may fall if the oscillator is in the middle.
Strong signal
Trend reversal or the price consolidation followed by trend reversal.
Medium signal
Trend may strengthen if the oscillator is close to the lower border.
Price consolidation is possible if the oscillator is close to the upper border.
Both price increase and price consolidation are possible if the oscillator is in the middle.
Bearish convergence
Here the price is above and oscillator is below:
Medium signal
The price may fall if the oscillator is within the upper range.
The price may stabilize if the oscillator is in the middle.
Strong signal
Trend reversal or price consolidation followed by trend reversal.
Medium signal
The trend may strengthen if the oscillator is within the upper range.
The price may rise if the oscillator is within the lower range.
Both price decrease and consolidation is possible if the oscillator is in the middle.
There is nothing more intriguing to the beginning commodity or stock trader than the discovery of oscillators. At first, oscillators appear to be the perfect trading tool because so often they give excellent buy and sell signals. But, the more you use oscillators, the more you realize that oscillators give an equal number of false signals. Since the turn of the century, traders have tried to tame their oscillators in order to develop a new approach that does not give false signals or false divergences yet provides an insight into the market that no other tool can. An oscillator actually measures the momentum of data, whether it is price, volume, or open interest. An oscillator will help show the speed at which the information is changing. Thus, it can also define over-bought or over-sold areas. The pioneer in oscillator work was Owen Taylor who in the 1920's presented oscillator work based on 7-day data. Taylor looked at price today versus a 7-day moving average of price or a 7-day moving average of advancing and declining stocks over the last seven days. In the 1940's Woods and Vignolia started their interesting approach to the market measuring volume in what is now known as On Balance Volume. These two gentlemen, based in San Francisco, started running a cumulative positive-negative volume flow that was later popularized by Joe Granville. Woods and Vignolia also did a tremendous amount of oscillator work using 20 to 40-day measurements of days that had up volume versus days that had down volume. Slightly earlier than this, the Lowry Reports out of Florida were busy running moving averages on advancing and declining stock or advancing and declining volume under their heading of "buying pressure" and "selling pressure". In the 1950's not too much was done in the way of oscillators. It wasn't until 1960 that Security Market Research, a service out of Denver, Colorado, showed an oscillator based on the difference between two moving averages that the oscillator number crunchers started getting busy again. The ability to construct oscillators improved substantially with the advent of the computer and especially small personal computers. That allowed the introduction of a new approach to oscillators going beyond a simple moving average. The new trading crowd had been to college, had studied their math, and was suddenly flipping around words like exponentials, supersonic averages, front-end-weighted moving averages, lagged moving averages, rolling numbers, etc. This all reached its zenith in what has become one of the most widely known oscillators constructed by Wells Wilder: the Relative Strength Index. In fact the index is not a measure of relative strength because "relative" means "in relation to something." What Wilder created was an oscillator based on a 14 day time cycle, an oscillator that has a decent record of giving buy and sell signals in the market.
The Oscillator Opportunity
The reason people have continued dabbling with oscillators is that they have the capability to give indications in advance of market turning points. I wrote an article in 1973 for what was then known as Commodities magazine (now Futures) that showed an approach to oscillators in the pork belly and soybean oil market that actually led major tops and bottoms in the market. The trouble for most oscillator workers was, and has continued to be, that while frequently oscillators lead sometimes they lead far too early and, instead of buying a bottom, you are buying falling daggers and getting sliced up. Even the best oscillators consistently give premature buy and sell signals. I believe my "Ultimate Oscillator" corrects this.
The Oscillator Problem
The largest failure of oscillators is their inability to deal correctly with the time cycles involved. Let me explain that a bit. If you use a 7-day average, as Taylor did in the 1920's, you will quickly find that the maximum move you are going to catch is one that lasts somewhere in the area of 3 1/2 to 9 days. In other words, the type of moves the oscillator catches cannot, by definition, be much longer than the time period measured in the oscillator. If you go out to a longer term approach—something that measures what is taking place in sixty or seventy days—the problem is that by the time your oscillator's identified the trend, the trend then reverses. Markets are so quick that anything using 30, 50, or 80 days does not respond quickly enough to get you in and out with profit. One thing I noticed through the years is that the traditional short term oscillators, such as those featured in most chart books, will turn very positive at the start of a major up-move in the market but quickly show divergence and overbought readings, causing most traders to sell short somewhere after the first leg of a bull market. They then take a short position on the market and hold that short position in one form or another, actual outright short or afraid to purchase, for the next three or four legs of the bull market. That can be a costly experience. This happens because the time measurements in the oscillators they are following are too short-term in nature to catch a major move.
All About the Ultimate Oscillator
What is really needed is an oscillator that expands as the market gets stronger or weaker. As an example, if the market shows a tremendous amount of strength your oscillator would expand the time base, thereby not allowing the short term fluctuation to influence the fact that the market has turned the corner on a long-term basis. To capture this effect, I have included in the ultimate oscillator three different time cycles in the marketplace. Additionally, instead of measuring price, I believe it is more profitable to measure the amount of accumulation and distribution taking place in the market.
It Is About Time
Time is one of the most critical elements in creating your oscillator. I have chosen three different time periods for the oscillator, three time cycles that generally have been the most dominant time cycles in the market. I use one which is based on 7, 14 and 28-day measurements of accumulation and distribution. I have found that those time periods are generally the ones that give the moves most traders wish to trade.
The Great Equalizer
One needs to equalize these time periods. To do this, we will multiply the data we get from the seven day time series by 4 and multiply the data arrived at from the 14 day time period by 2, thus having equal values for all three cycles.
Measuring Accumulation and Distribution
I have tried to measure accumulation and distribution in commodities in terms of volume, in terms of open interest and in terms of net change, in terms of volatility factors, in terms of tick by tick trade, you name it. The bottom line of all that effort is that what appears to be the easiest way of measuring accumulation and distribution is to simply define selling pressure as the price movement from the high to the close each day while taking the buying measurement to be the difference between the low and the close. For this study, one must also incorporate the previous day's closing price if the following day's high is lower than the previous day's closing price or the following day's low is higher than the closing price. In short, then one must fill in the gaps that occur between yesterday's price and today's high or low. As an example, if yesterday's closing price was 60 and this morning's low was 61 with a close today of 63, the measure of buying would not be 63 minus 61 but 63 minus 60 or 3 cents of buying.
Constructing the Oscillator
You need to set up several columns. First, I always post the high, low, and close each day. In one column to the right I have the buying units for that day, defined as the close minus the true low. I then skip a couple of columns and have another column to record the total activity of the day. We would define that by subtracting the true high from the true low. We have then created on a daily basis the amount of buying for the day and the total amount of activity (buying and selling) for the day. I next run a 7-day sum of the total amount of buying for the last seven days. I also run a 14-day sum of the buying figure and finally a 28-day sum. I then do the same thing with the total activity or range figure by running 7, 14, and 28-day sums of the range. Now the fun begins. I then divide the 7-day figure of the range into the 7-day figure of buying, giving the percent of buying in that time period. I next divide the total range of the 14 days into the buying of the 14 days to give me a percent of buying for the 14 days. I follow up with the third step of dividing the total range for the last 28 days into the total buying for the 28 days, giving me a percentage of buying during that time period. Finally I multiply the 7 day figure by 4 and the 14-day figure by 2 to equalize the impact that each time period will have. If you have followed along with me so far, you now realize that I add the final 7, 14, and 28-day figures into one master percentage figure that reflects the buying pressures and, concomitantly, the selling, of three time periods over the last 28 days, all equalized to give each time period an equal impact. This data is then plotted as a percentage change underneath price action resulting in the Ultimate Oscillator.
Rules for Using the Ultimate Oscillator
There will be two requirements for a buy and sell signal to activate a market position using the oscillator. Our first demand is that we have a price divergence from the oscillator. In the case of a buy we must have had a lower low in price that was not matched by a lower low in the oscillator. In the case of a sell we must have had a higher high in price that was not matched by the oscillator. Secondly, await a trend break
CHART 1
in the Ultimate Oscillator to produce the actual signal. Once the divergence for a sell signal has occurred, note the low in the oscillator (Chart 1) prior to the peak that set up the divergence. I have marked this as A on the February 1984 Belly chart. Once the Ultimate Oscillator falls below this low, you can take a short position in the market. The failure in the oscillator is your indication that it is time to sell. Frequently you will see this taking place right at or very close to the actual high in price. After the divergence for a buy signal has occurred note the high in the oscillator prior to the low that set up the divergence. I have marked this as B on the February 1984 Belly chart. Once the Ultimate Oscillator rises above this peak you take a long position. The trend break in the oscillator is your indication that buyers now dominate and an up move will begin. Again, note how close this trend break to the upside occurs in the daily price lows. Once you have entered a position, you will exit in one of the three following manners:
If Short 1. Exit on an opposite signal occurring. You would also be reversing to the long side. 2. Go flat, not reversing, when the Ultimate Oscillator falls to 30% or less. This signal will be early at times but its usage will greatly increase your percent of winners and reduce your number of sleepless nights. 3. Once short, close our your position by going flat any time the index rises above 65%,. This is your initial stop loss.
If Long 1. Exit on an opposite signal occurring. You would also be reversing to the short side. 2. Go flat, not reversing, when the Ultimate Oscillator rises above 70%. Comments in #2 above apply. 3. Once long, close out your position going flat any time the index falls below 45% after having risen above 50%. This is your stop loss.
All divergence signals must first have seen the index rise above 50% for sell and fallen below 30% for a buy. Divergent patterns that occur without the index first going to these levels are not to be acted upon.
About the author: Larry Williams has been entrenched in the financial markets for over 40 years. His most notable accomplishment is the creation of the williams %R indicator. However, throughout the last 40 years Williams has developed other tools that are widely used throughout the industry. Other achievements include the pivot point, the williams accumulation/distribution indicator, the shadow technique for moving averages, momentum studies, the 4-year master stock market pattern and numerous trading concepts that are widely accepted in today's trading standards. Williams has written numerous books on trading the market, teaches at seminars and provides consulting for trading sites such as www.marketclub.com.
Buy a copy of School of Pipsology for $49 in PDF format
Buy and download a printable and easy-to-read PDF document containing the ENTIRE School of Pipsology. The PDF is an exact copy of the School section, over 250 pages (pictures included), minus advertisements and chapter-ending quizzes. Read it on-screen or print it so you can take it with you on the road.
When you buy the PDF you'll receive an email within minutes with (1) a DIRECT LINK to download the PDF and (2) a PASSWORD to open the PDF. You MUST have the password to open the PDF.
*Please add INFO@BABYPIPS.COM and SERVICE@BABYPIPS.COM to your SPAM whitelist/safe-sender list.
I agree to be charged $49 for one copy of "School of Pipsology" in PDF format. PAYPAL is the only form of payment accepted. I understand I'm purchasing a single copy for myself and I won't make copies of the book or distribute it to anyone else. If someone else wants a copy I'll encourage them to purchase their own. I also understand that I will need a password to open the PDF each time.
We’ve covered a lot of tools that can help you analyze charts and identify trends. In fact, you may now have too much information to use effectively.
In this lesson, we’re going to look at streamlining your use of these chart indicators. We want you to fully understand the strengths and weaknesses of each tool, so you’ll be able to determine which ones work for you and your trading plan…and which ones don’t.
Leading versus Lagging Indicators
Let’s discuss some concepts first. There are two types of indicators: leading and lagging.
A leading indicator gives a buy signal before the new trend or reversal occurs.
A lagging indicator gives a signal after the trend has started and basically informs you “hey buddy, pay attention, the trend has started, you’re missing the boat.”
You’re probably thinking, “Ooooh, I’m going to get rich with leading indicators!” since you would be able to profit from a new trend right at the start. You’re right – you would “catch” the entire trend every single time, IF the leading indicator was correct every single time. But it’s not.
When you use leading indicators, you will experience a lot of fake-outs. Leading indicators are notorious for giving bogus signals which will “mislead” you. Get it? Leading indicators that "mislead" you? Ha-ha. Man we're so funny we even crack ourselves up.
The other option is to use lagging indicators, which aren’t as prone to bogus signals. Lagging indicators only give signals after the price change is clearly forming a trend. The downside is that you’d be a little late in entering a position. Often the biggest gains of a trend occur in the first few bars, so by using a lagging indicator you could potentially miss out on much of the profit. Which sucks.
Oscillators and Trend Following Indicators
For the purpose of this lesson, let’s broadly categorize all of our technical indicators into one of two categories:
Oscillators
Trend following or momentum indicators
Oscillators are leading indicators.
Momentum indicators are lagging indicators.
While the two can be supportive of each other, they're more likely to conflict with each other. We’re not saying that one or the other should be used exclusively, but you must understand the potential pitfalls of each.
Oscillators / Leading Indicators
Buy a copy of School of Pipsology for $49 in PDF format
Buy and download a printable and easy-to-read PDF document containing the ENTIRE School of Pipsology. The PDF is an exact copy of the School section, over 250 pages (pictures included), minus advertisements and chapter-ending quizzes. Read it on-screen or print it so you can take it with you on the road.
When you buy the PDF you'll receive an email within minutes with (1) a DIRECT LINK to download the PDF and (2) a PASSWORD to open the PDF. You MUST have the password to open the PDF.
*Please add INFO@BABYPIPS.COM and SERVICE@BABYPIPS.COM to your SPAM whitelist/safe-sender list.
I agree to be charged $49 for one copy of "School of Pipsology" in PDF format. PAYPAL is the only form of payment accepted. I understand I'm purchasing a single copy for myself and I won't make copies of the book or distribute it to anyone else. If someone else wants a copy I'll encourage them to purchase their own. I also understand that I will need a password to open the PDF each time.
An oscillator is any object or data that moves back and forth between two points. In other words, it’s an item that is going to always fall somewhere between point A and point B. Think of when you hit the oscillating switch on your electric fan.
Think of our technical indicators as either being “on” or “off”. More specifically, an oscillator will usually signal “buy” or “sell”, with the only exception being instances when the oscillator is not clearly at either end of the buy/sell range.
Does this sound familiar? It should! Stochastics, Parabolic SAR, and the Relative Strength Index (RSI) are all oscillators. Each of these indicators is designed to signal a possible reversal, where the previous trend has run its course and the price is ready to change direction.
Let’s take a look at a few examples.
On the 1-hour chart of USD/EUR below, we have added a Parabolic SAR indicator, as well as an RSI and Stochastic oscillator. As you have already learned, when the Stochastic and RSI begin to leave their “oversold” region that is a buy signal.
Here we get buy signals between the hours 3:00 am EST and 7:00 am EST on 08/24/05. All three of these buy signals occurred within one or two hours of each other, and this would have been a good trade.
We also got a sell signal from all three indicators between the hours of 2:00 am EST and 5:00 am EST on 08/25/05. As you can see, the Stochastic indicator remained in the overbought for a pretty long time - about 20 hours. Usually when an oscillator remains in the overbought or oversold levels for a long period of time, that means there is a strong trend occurring. In this example, since Stochastic stayed overbought, you see there was a strong uptrend present.
Now let’s take a look at the same leading oscillators messing up, just so you know these signals aren’t perfect. Looking at the chart below, you can quickly see that there were a lot of false buy signals popping up. You’ll see how one indicator says to buy, while the other one is still saying sell.
Around 1 am EST on 08/16/05, both RSI and Stochastic gave buy signals, while Parabolic SAR still showed a sell signal. Yes, Parabolic SAR gave a buy signal 3 hours later at 4 am EST, but then Parabolic SAR turned into a sell signal one bar later. If you actually look at the bar with the Parabolic SAR below it, notice how it’s a strong looking red bar with very short shadows. Also, notice how the next bar closed below it. This would not have been a good long trade.
On the last two oversold (buy) signals given by Stochastic, notice how there is no indicator at all for RSI, but Parabolic SAR is giving sell signals. What’s going on here? They are each giving you different signals!
What happened to such a good set of indicators?
The answer lies in the method of calculation for each one. Stochastic is based on the high-to-low range of the time period (in this case, it’s hourly), yet doesn’t account for changes from one hour to the next. The Relative Strength Index (RSI) uses change from one closing price to the next. And Parabolic SAR has its own unique calculations that can further cause conflict.
That’s the nature of oscillators – they assume that a particular chart pattern always results in the same reversal. Of course, that’s hogwash.
While being aware of why a leading indicator may be in error, there’s no way to avoid them. If you’re getting mixed signals, you’re better off doing nothing than taking a ‘best guess’. If a chart doesn’t meet all your criteria, don’t force the trade! Move on to the next one that does meet your criteria.
Momentum / Lagging Indicators
Buy a copy of School of Pipsology for $49 in PDF format
Buy and download a printable and easy-to-read PDF document containing the ENTIRE School of Pipsology. The PDF is an exact copy of the School section, over 250 pages (pictures included), minus advertisements and chapter-ending quizzes. Read it on-screen or print it so you can take it with you on the road.
When you buy the PDF you'll receive an email within minutes with (1) a DIRECT LINK to download the PDF and (2) a PASSWORD to open the PDF. You MUST have the password to open the PDF.
*Please add INFO@BABYPIPS.COM and SERVICE@BABYPIPS.COM to your SPAM whitelist/safe-sender list.
I agree to be charged $49 for one copy of "School of Pipsology" in PDF format. PAYPAL is the only form of payment accepted. I understand I'm purchasing a single copy for myself and I won't make copies of the book or distribute it to anyone else. If someone else wants a copy I'll encourage them to purchase their own. I also understand that I will need a password to open the PDF each time.
So how do we spot a trend? The indicators that can do so have already been identified as MACD and moving averages. These indicators will spot trends once they have been established, at the expense of delayed entry. The bright side is that there’s less chance of being wrong.
On this 1-hour chart of EUR/USD, there was a bullish crossover for MACD at 3:00 am EST on 08/03/05 and the 10 period EMA crossed over the 20 period EMA at 5:00 am. These two signals were all accurate, but if you waited for both indicators to give you a bull signal, you would have missed out on the big move. If you calculate from the start of the uptrend at 10:00 pm EST on 08/02/05 to the close of the candle at 5:00 am EST on 08/03/05, you would have watched a gain of 159 pips while sitting on the sidelines.
Let’s take a look at the same chart so you can see how these crossover signals can sometimes give false signals. We like to call them “fake-outs”. Look at how there was a bearish MACD crossover after the uptrend we just discussed.
Ten hours later, the 20 EMA crossed below the 10 EMA giving a “sell” signal. As you can see, the price didn’t drop but stayed pretty much sideways, then continued its uptrend. By the time both indicators were in agreement, you would’ve entered a short trade at the bottom and set yourself up for a loss. Bummer, dude!
Summary
Buy a copy of School of Pipsology for $49 in PDF format
Buy and download a printable and easy-to-read PDF document containing the ENTIRE School of Pipsology. The PDF is an exact copy of the School section, over 250 pages (pictures included), minus advertisements and chapter-ending quizzes. Read it on-screen or print it so you can take it with you on the road.
When you buy the PDF you'll receive an email within minutes with (1) a DIRECT LINK to download the PDF and (2) a PASSWORD to open the PDF. You MUST have the password to open the PDF.
*Please add INFO@BABYPIPS.COM and SERVICE@BABYPIPS.COM to your SPAM whitelist/safe-sender list.
I agree to be charged $49 for one copy of "School of Pipsology" in PDF format. PAYPAL is the only form of payment accepted. I understand I'm purchasing a single copy for myself and I won't make copies of the book or distribute it to anyone else. If someone else wants a copy I'll encourage them to purchase their own. I also understand that I will need a password to open the PDF each time.
How do you figure out whether to freakin’ use oscillators, or trend following indicators, or both? After all, we know they don’t always work in tandem.
This is probably the most challenging part about technical analysis. And why I call it the million dollar question.
We will provide the million dollar answer in a future lesson.
For now, just know that once you're able to identify the type of market you are trading in, you will then know which indicators will give accurate signals, and which ones are worthless at that time.
This is no piece of cake. But it's a skill you will slowly improve upon as your experience grows.
Summary
There are two types of indicators: leading and lagging.
A leading indicator gives a buy signal before the new trend or reversal occurs.
A lagging indicator gives a signal after the trend has started
Technical indicators into one of two categories: Oscillators and trend following or momentum indicators.
Oscillators are leading indicators.
Momentum indicators are lagging indicators.
If you're able to identify the type of market you are trading in, you will then know which indicators will give accurate signals, and which ones are worthless at that time.
Buy a copy of School of Pipsology for $49 in PDF format
Buy and download a printable and easy-to-read PDF document containing the ENTIRE School of Pipsology. The PDF is an exact copy of the School section, over 250 pages (pictures included), minus advertisements and chapter-ending quizzes. Read it on-screen or print it so you can take it with you on the road.
When you buy the PDF you'll receive an email within minutes with (1) a DIRECT LINK to download the PDF and (2) a PASSWORD to open the PDF. You MUST have the password to open the PDF.
*Please add INFO@BABYPIPS.COM and SERVICE@BABYPIPS.COM to your SPAM whitelist/safe-sender list.
I agree to be charged $49 for one copy of "School of Pipsology" in PDF format. PAYPAL is the only form of payment accepted. I understand I'm purchasing a single copy for myself and I won't make copies of the book or distribute it to anyone else. If someone else wants a copy I'll encourage them to purchase their own. I also understand that I will need a password to open the PDF each time.
Relative Strength Index, or RSI, is similar to stochastics in that it identifies overbought and oversold conditions in the market. It is also scaled from 0 to 100. Typically, readings below 20 indicate oversold, while readings over 80 indicate overbought.
Using RSI
RSI can be used just like stochastics. From the chart above you can see that when RSI dropped below 20, it correctly identified an oversold market. After the drop, the price quickly shot back up.
RSI is a very popular tool because it can also be used to confirm trend formations. If you think a trend is forming, take a quick look at the RSI and look at whether it is above or below 50. If you are looking at a possible uptrend, then make sure the RSI is above 50. If you are looking at a possible downtrend, then make sure the RSI is below 50.
In the beginning of the chart above, we can see that a possible uptrend was forming. To avoid fakeouts, we can wait for RSI to cross above 50 to confirm our trend. Sure enough, as RSI passes above 50, it is a good confirmation that an uptrend has actually formed. Okey dokey, we've covered a smorgasbord of indicators, let's see how we can put all of what you just learned together...
Buy a copy of School of Pipsology for $49 in PDF format
Buy and download a printable and easy-to-read PDF document containing the ENTIRE School of Pipsology. The PDF is an exact copy of the School section, over 250 pages (pictures included), minus advertisements and chapter-ending quizzes. Read it on-screen or print it so you can take it with you on the road.
When you buy the PDF you'll receive an email within minutes with (1) a DIRECT LINK to download the PDF and (2) a PASSWORD to open the PDF. You MUST have the password to open the PDF.
*Please add INFO@BABYPIPS.COM and SERVICE@BABYPIPS.COM to your SPAM whitelist/safe-sender list.
I agree to be charged $49 for one copy of "School of Pipsology" in PDF format. PAYPAL is the only form of payment accepted. I understand I'm purchasing a single copy for myself and I won't make copies of the book or distribute it to anyone else. If someone else wants a copy I'll encourage them to purchase their own. I also understand that I will need a password to open the PDF each time.
Stochastics are another indicator that helps us determine where a trend might be ending. By definition, a stochastic is an oscillator that measures overbought and oversold conditions in the market. The 2 lines are similar to the MACD lines in the sense that one line is faster than the other.
How to Apply Stochastics
Like I said earlier, stochastics tells us when the market is overbought or oversold. Stochastics are scaled from 0 to 100. When the stochastic lines are above 70 (the red dotted line in the chart above), then it means the market is overbought. When the stochastic lines are below 30 (the blue dotted line), then it means that the market is oversold. As a rule of thumb, we buy when the market is oversold, and we sell when the market is overbought.
Looking at the chart above, you can see that the stochastics has been showing overbought conditions for quite some time. Based upon this information, can you guess where the price might go?
If you said the price would drop, then you are absolutely correct! Because the market was overbought for such a long period of time, a reversal was bound to happen.
That is the basics of stochastics. Many traders use stochastics in different ways, but the main purpose of the indicator is to show us where the market is overbought and oversold. Over time, you will learn to use stochastics to fit your own personal trading style.
Use Stochastics in Trending market The key is when the market is trending up, we will look for oversold conditions (when the Stochastics fall below the oversold level (below 20) and rises back above the same level) to get ready to trade, and in the same way, when the market is trending down we will only look for overbought conditions (when the Stochastics rise above de overbought level (above 80) and falls back below the same level.
Use Stochastic in Trend-less market
Buy when %K falls below the oversold level (below 20) and rises back above the same level.
Sell when %K rises above de overbought level (above 80) and falls back below the same level.
I am in my mid-forties, an IT professional graduated with BE degree. Career-wise I am in mid-level management role working in a fulfilling job with some traveling in Asian region and some free time available to pursue other interests. I have been trading Forex for the past 4 years. So far, I have busted 2 trading accounts and wipe out $40K SGD. This blog is a record of a renew journey in trading Forex.
(4 Dec 2008)